How to setting Router and PC if using 2 routers at the same time

Diposkan oleh Astia Rez
ROUTER 1
·        Enable
·        Configure terminal
·        Interface Serial2/0
·        IP Address 192.168.2.1 255.255.255.0
·        Clock Rate 9600
·        Exit
·        Interface FastEthernet0/0
·        No shutdown
·        IP Address 192.168.0.1 255.255.255.0
·        Exit
      Router (config) #router ripRouter (config-router) #net 192.168.1..0
      Router(config-router)#net 192.168.2.0
      Router (config-router) #exitRouter (config) # exit
 
ROUTER 2
·        Enable
·        Configure Terminal
·        Interface Serial2/0
·        IP Address 192.168.2.2 255.255.255.0
·        Clock rate 9600
·        exit
·        Interface FastEthernet0/0
·        No shutdown
·        IP Address 192.168.1.1 255.255.255.0
·        Exit
      Router (config) #router ripRouter (config-router) 192.168.1.0 #net
      Router(config-router)#net 192.168.2.0
      Router (config-router) #exitRouter (config) # exit
1.Set the IP Config PC 1
·        IP Address = 192.168.0.2
·        Subnet Mask       = 255.255.255.0
·        Gateway     = 192.168.0.1
2.Setting IP Config PC 2
·        IP Address = 192.168.1.2
·        Subnet Mask       = 255.255.255.0
·        Gateway     = 192.168.1.1
3.Click on the PC first and then select terminal
·        enable
·        Configure terminal
·        IP Route 192.168.1.0 255.255.255.0 192.168.2.2
     4.Click and select PC 2 terminal
      * Enable
·       Configure terminal
·       IP route 192.168.0.0 255.255.255.0 192.168.2.1
So this is end of my tutorial about How to setting Router and PC if using 2 routers at the same time. If you want to send comments and suggestions please comment on my blog ...... thank you for your visit. !!!
Category: 2 komentar

2 komentar:

Janize estillore said...

I don't knw who you are,but I'd like to tell you that I hated you....

3 June 2014 at 23:03
Janize estillore said...

I hated you...

3 June 2014 at 23:04

Post a Comment